THERMOFOX: Fast marking on-site
The new THERMOFOX mobile printing systems provide solutions for all requirements in industrial marking.
The clear, comprehensive marking of all components, devices, and systems in industrial operation is becoming even more important. The new THERMOFOX mobile printing systems provide solutions for all requirements in industrial marking. Print the required marking at your desk or right on site in your application.
The printer THERMOFOX is a small, light hand-held printer for the fast marking on-site. This thermal transfer printer is easy to use, user-friendly and processes endless marking materials for the cable/Wire, device and terminal block marking as well as the plant identification.
The THERMOFOX is a mobile thermal transfer printer with a print head width of 1 inch for processing continuous labels, signs and shrink sleeves. The length of the respective marking material is freely selectable and can be correspondingly cut to length with a manual cutter. The materials are supplied in conjunction with the matching ink ribbon for the THERMOFOX in practical material cassettes (MM – Mobile Material). These allow fast ink or material replacement in less than 10 seconds.
Major features and benefits:
Mobile printer: Flexibility when and where you can print, spontaneous printing directly on-site possible.
CLIP PROJECT – one software for all printing systems: Simple transfer of marking data’s. For large projects the THERMOFOX can be addressed with CLIP PROJECT by a laptop.
Up to 8.6 m label length: In comparison to the competitor (6.4 m) the THERMOFOX offers significantly more benefit per cartridge.
Up to 24 mm label width: In comparison to the competition (max. 19 mm) labels up to 24 mm width can be printed.
Material cartridge with automatic material detection: Settings are adjusted automatically and misprints are reduced.
Large variety of barcodes: Availability of 12 different barcodes.
High storage capacity: 20 label projects are storable
Material portfolio: The customer can cover more applications in comparison to the competition.
• Shrink sleeve with shrink ratio 2:1 = time saving as the shrink sleeve holds
tight to the cable also without shrinking
• Non-adhesive labels/TMT = possibility for marking terminal blocks and tags.
For more details, visit www.phoenixcontact.com